Professional 1+2 Type Full Automatic Virus Protection Ultrasonic Face Mask Making Machine Manufacturer

Simple introduction:

The full-automatic medical mask making machine (one for two) uses servo and constant temperature control system to control the material from entering compounding → molding → welding → punching → spot welding ear bands at one time through the PL program control. The entire production process is fully automated. Product features of the mask machine The mask machine is a process of manufacturing a variety of masks with constant filtration performance through processes such as hot-pressed folding molding, ultrasonic welding, scrap removal, and welding of earband nose bridge strips. Its production rate of masks is 120 pieces / min and above, and the pass rate is over 98%, which can more than double the production efficiency of similar products.

First, the main parameters:

★ Product specifications: 175mm * 95mm;

★ Product structure: left and right elastic earbands + outer nonwoven fabric + nose bridge strip + meltblown fabric + inner nonwoven fabric;

★ Design speed: 120 tablets / minute;

★ Production speed: 100 tablets / minute;

★ Power: 220V 50HZ;

★ Installed capacity: about 10KW (including air compressor power);

★ Compressed air: 0.6 ~ 0.8Mpa, 1.0 cubic meter / minute;

★ Defective rate: ≤1% (excluding defective products caused by glue spraying machine and material joints);

★ Start-up rate: ≥85%;

★ Equipment size: (length * width * height) 6500 * 3500 * 1900mm;

★ Machine color: sheet metal warm gray 1C, primary color of aluminum profile;

★ Weight: about 5T.

mask making machine video show :

Second, the mask making machine basic configuration

1. Non-woven fabric supply, roll diameter ≤1000mm:

1) Mechanical tension rack, tension spring control;

2) Automatic shutdown alarm when material is broken.

2. Melt-blown cloth supply, roll diameter ≤1000mm:

1) Mechanical tension rack, tension spring control;

2) When the material is cut off, it will automatically stop and alarm, and the connector will be rejected automatically.

3． Supply of non-woven fabric in inner layer, roll diameter ≤1000mm:

1) Mechanical tension rack, tension spring control;

2) Automatic shutdown alarm when material is broken.

4． Nose bridge strip supply, roll diameter ≤500mm:

1) Mechanical tension rack, tension spring control;

2) Nose bridge feeding and cutting device, servo control;

3) Automatic shutdown alarm when material is broken.

5． Middle three-fold device.

6. Folding device.

7. Peripheral sealing device, cylinder pressure, servo control.

8. Finished cutting device, spring-loaded, servo-controlled.

9. Vertical conveying alignment device, phase adjustment without stopping, servo control.

10. 2 sets of ultrasonic spot welding devices, cylinder control.

Third, the automatic configuration:

★ PLC-touch screen-servo-control system;

★ The temperature controller controls the embossing temperature;

★ Single shift output and total output are displayed on the touch screen;

★ Automatic detection and shutdown of all materials;

★ The up and down speed of the host is set on the touch screen, and the current speed (chip / minute) of the host is displayed synchronously on the touch screen;

★ Automatic shutdown of electrical appliances.

Fourth, random tool information:

1. 1 set of random tools;

2. 1 instruction manual for the equipment (including 1 copy of the process, transmission, and electrical schematic diagrams);

3. A spare set of chopped knife. (W6 material)

If you want get more details for automatic mask making machine ,or can not find out what you are  looking for,pls feel free to contact me,i will do my best for you.

 Contact : Lucy Yang

Whatsapp:+86-15830684624

Email: lucy@greatcitygroup.com

Xingtai Judu Technology Co., Ltd