Core Components: | |
---|---|
Raw Material: | |
Condition: | |
Type: | |
Brand Name: | |
Availability: | |
Quantity: | |
JD14
Greatcity
Wire Straightening and Cutting Machine Steel Bar/Rebar Straightening and Cutting Machine with high efficiency
Introduction & Advantage:
The rebar straightening and cutting machine 3mm is easy to disassemble, move and install. Equipped with numerical control device, it can be positioned according to different requirements, quantity and length of customers. It can straighten steel without error or noise, suitable for various construction and steel processing.
Features:
1. With the control of micro-computer, the rebar (round steel & screw-thread steel) is strengthened and cut automatically by hydraulic pressure.
2. Easy to operate.
3. Electronic digital ruler, without mechanical ruler.
4. Less land occupation, moderate weight and easy to remove and pack.
5. Efficient and convenient: multiple-batch input of length and quantity simultaneously & computer storage memory.
6. Stable operation, low failure rate and easy maintenance.
7. Taper coordination to stabilize the feeding cylinder. Dual supports bearing counting frame to accurate the error to 5 mm.
8. Bullet-type cylinder with large mating surface to reduce oil leakage. Advanced spring to prolong service life.
9. More reliable fit of all tubing with D-type joints instead of O-opening seals.
10. The drum feeder is used for smoother feeding.
rebar straightening and cutting machine 3mm working video
https://www.youtube.com/@mengrita9445
The general specification of rebar straightening and cutting machine 3mm
Machine category | Straightening and cutting machine |
Model | JD14 |
Type | CNC hydraulic straightening machine |
Straightening length | 800-9000 mm ( or more) |
Raw material | Round bar, deformed bar |
Round bar diameter | 4-14 mm |
Deformed bar | 4-12 mm |
Straightening wheel | 8 wheels |
Voltage | 380V |
Cutting speed | 45 m/ min ( up to 60m/min) |
Motor power | 7.5+5.5+4 kW (11+5.5+4 kW) |
Machine weight | 1000 Kg |
Machine size | 2750*730*1060 mm |
We use three-layer protective packaging rebar straightening and cutting machine 3mm, first covered with plastic bags, and then re protected with recycled cotton to prevent paint damage, and finally put them into wooden or iron boxes to better ensure product safety. steel bar straightening and cutting machine
Xingtai Judu Technology Co.,Ltd is located in the historical industrial zone, Hebei province. Founded in 1999, we are a professional manufacturer of series of rebar straightening and cutting machine 3mm ,cnc wire bendingmachine price and thread rolling machine. For twenty years in development, our company has always been adhering to credit the first best quality in after sale service, innovation, self-improvement, adhere an independent intellectual property right as the core of scientific and technological innovation. The current steel hoop bending machine and horizontal lathes for the company's main product are sold throughout the country, some products exported to Asia, Africa, and other countries and regions, we are abide by integrity and innovation, entrepreneurial spirit, relying on leading research and development capabilities efficient manufacturing, stable quality and good service to meet the needs of our customers at home and abroad, the company has now passed the ISO9001:2000 international quality management system certification.
Question 1 :Can you customize the rebar straightening and cutting machine 3mm for us?
Answer:yes ,we are factory ,we can customize the machine depend your request .
Question 2 :Can your technician come to our country to install and adjust the machine?
Answer:yes ,our technician can go to your country to help you install and adjust machine .
Question 3 :How long is the warranty?
Answer:warranty 18 months .In period of warranty ,we change the new parts for broken parts for free .
we provide technical support for long-life.Question 4 :If the machine has a problem, how long will it get a reply?
Answer:We will provide solutions within 24 hours.
Question 5 :What are spare parts equiped with machine ?
Answer:The machine equip with two pieces cutter ,two pieces base blade ,two pieces bending shaft ,
two pieces bending cover and one tool box(include all tools you need when install machine ).Contact Us
Wire Straightening and Cutting Machine Steel Bar/Rebar Straightening and Cutting Machine with high efficiency
Introduction & Advantage:
The rebar straightening and cutting machine 3mm is easy to disassemble, move and install. Equipped with numerical control device, it can be positioned according to different requirements, quantity and length of customers. It can straighten steel without error or noise, suitable for various construction and steel processing.
Features:
1. With the control of micro-computer, the rebar (round steel & screw-thread steel) is strengthened and cut automatically by hydraulic pressure.
2. Easy to operate.
3. Electronic digital ruler, without mechanical ruler.
4. Less land occupation, moderate weight and easy to remove and pack.
5. Efficient and convenient: multiple-batch input of length and quantity simultaneously & computer storage memory.
6. Stable operation, low failure rate and easy maintenance.
7. Taper coordination to stabilize the feeding cylinder. Dual supports bearing counting frame to accurate the error to 5 mm.
8. Bullet-type cylinder with large mating surface to reduce oil leakage. Advanced spring to prolong service life.
9. More reliable fit of all tubing with D-type joints instead of O-opening seals.
10. The drum feeder is used for smoother feeding.
rebar straightening and cutting machine 3mm working video
https://www.youtube.com/@mengrita9445
The general specification of rebar straightening and cutting machine 3mm
Machine category | Straightening and cutting machine |
Model | JD14 |
Type | CNC hydraulic straightening machine |
Straightening length | 800-9000 mm ( or more) |
Raw material | Round bar, deformed bar |
Round bar diameter | 4-14 mm |
Deformed bar | 4-12 mm |
Straightening wheel | 8 wheels |
Voltage | 380V |
Cutting speed | 45 m/ min ( up to 60m/min) |
Motor power | 7.5+5.5+4 kW (11+5.5+4 kW) |
Machine weight | 1000 Kg |
Machine size | 2750*730*1060 mm |
We use three-layer protective packaging rebar straightening and cutting machine 3mm, first covered with plastic bags, and then re protected with recycled cotton to prevent paint damage, and finally put them into wooden or iron boxes to better ensure product safety. steel bar straightening and cutting machine
Xingtai Judu Technology Co.,Ltd is located in the historical industrial zone, Hebei province. Founded in 1999, we are a professional manufacturer of series of rebar straightening and cutting machine 3mm ,cnc wire bendingmachine price and thread rolling machine. For twenty years in development, our company has always been adhering to credit the first best quality in after sale service, innovation, self-improvement, adhere an independent intellectual property right as the core of scientific and technological innovation. The current steel hoop bending machine and horizontal lathes for the company's main product are sold throughout the country, some products exported to Asia, Africa, and other countries and regions, we are abide by integrity and innovation, entrepreneurial spirit, relying on leading research and development capabilities efficient manufacturing, stable quality and good service to meet the needs of our customers at home and abroad, the company has now passed the ISO9001:2000 international quality management system certification.
Question 1 :Can you customize the rebar straightening and cutting machine 3mm for us?
Answer:yes ,we are factory ,we can customize the machine depend your request .
Question 2 :Can your technician come to our country to install and adjust the machine?
Answer:yes ,our technician can go to your country to help you install and adjust machine .
Question 3 :How long is the warranty?
Answer:warranty 18 months .In period of warranty ,we change the new parts for broken parts for free .
we provide technical support for long-life.Question 4 :If the machine has a problem, how long will it get a reply?
Answer:We will provide solutions within 24 hours.
Question 5 :What are spare parts equiped with machine ?
Answer:The machine equip with two pieces cutter ,two pieces base blade ,two pieces bending shaft ,
two pieces bending cover and one tool box(include all tools you need when install machine ).Contact Us