You are here: Home » Products » wire bending machine » 2d wire bending machine » chinese servo automatic CNC stainless steel wire bending machine 2d

Product Detail

Share to:

chinese servo automatic CNC stainless steel wire bending machine 2d

steel wire bending machine without the need of the special mold, it greatly reduces the time and cost of the newly developed product; the stereoscopic molding can produce a three-dimensional shape line molding product; with an auxiliary lifting platform, it can further guarantee the production.
The stability and consistency of the product; the cutting knife can move downward to allow more space for product molding.

Diameter of wire:
Machine Type:
Material:
Applicable wire:
Control system:
Quantity:
  • ZD-2D-612
  • Greatcity
  • 8463300000

Advantages of  steel wire bending machine :

1. Designed in accordance with European customer requirements, increase the fuselage 80 * 80mm steel pipe welded heavy steel frame, the fuselage is more stable, the same domestic models are 40 * 40mm; 

2, imitate the German 3D machine to extend the upper and lower cutters, There is no trace on the wire cut, and the maximum diameter can be 12mm;

3. Five-axis ball screw, all Taiwan servo motor and control system, a full set of high-equipped reducer to make the machine last longer. 

4. Newly designed domestic original straightening frame, once straightened, and subsequent adjustments without secondary adjustment. With overall compression function; save a lot of time for subsequent straightening

5.The wire does not slip and does not damage the surface of the wire. There are three sets of linear adjusters, with a wheel diameter of 75mm. The diameter of the straightening wheel is increased to 40mm, which is more durable. Outer mold installation and removal is easier and saves time.

6.Thick steel plate design, increase the inner mold shaft diameter to 55mm, wire diameter above 7mm, long-term working machine is stable, not deformed, the same shaft diameter in China is 35mm; 

7, this model is the largest domestic size, the highest configuration, the most weight Heavy, longest service life of a new large wire diameter 2D machine

ZD-2D-612 model  steel wire bending machine technical specification:


Model 

ZD-2D-612

number of  axles

3

processing wire dameter range 

6—12mm (iron wire )

Number of feeder wheels (group)

3

Applicable wire

Round wire, flat wire  square wire (suitable for any wire material)

Storage

10,000 data, 300 actions in a group

minimum feeding speed(m/min)

22

Servo motor power of feeding shaft(kW)

4.5

Power of Servomotor for Cutter Shaft(kW)

2.3

Power of Folded Axis Servomotor(kW)

3.8

Direction of action

Internal and external die can be lifted and bended in both directions.

Feeding  accuracy(mm)

±0.1

minimum bending speed

800rmp/min,angle±180º

Capacity 

20-24pcs/min,(200*200mm square shape)

operating system

32-bit Chinese and English (with upload and download function)

Input power supply

380V,50HZ/60HZ

weight (KG)

2300

Dimension (length*width*height mm)

3250×1200×1300

steel wire bending machine video link on youtube :

Composition and description of ateel wire bending machine 

The machine structure consists of a machine stand and a feeding rack.

Machine platform composition: 

1.feed assembly, 

2.straightening frame, 

3.bending assembly, 

4.pneumatic system, 

5.CNC electrical control part.

Functional Composition of Machine: 

1.Pneumatic Unit (Controlling External Mould and Cutter Lift)

2.Feeding Assembly (Completing Material Transportation). 

3.Straightening Frame (Straightening Material). 

4.Bending Line Assembly (Product Forming)

2d wire bending machine (2)

2d wire bending machine (3)

2d wire bending machine (4)

2d wire bending machine (5)

2d wire bending machine (7)

wire bending machine


Instructions for steel  wire bending machine  :

1. Install and place the machine correctly. After the machine is placed in the workshop, it is necessary to place the machine horizontally, so as to prevent the wire rod forming machine from shaking during production.

2. Connect the cable line and ground wire according to the instructions, turn on the switch of the numerical control controller, and check whether there is reverse connection of the cable. If the reverse connection is found, adjust the power line and connect it again.

3. The wire feeding mechanism is composed of three pairs of wire feeding wheels. The wire feeding wheels have two different depressions, which are used to compress wires with different wire diameters. Customers can adjust the front and back sides of the wire feeding wheel according to their wire diameter size to rotate the hand wheel until they clamp your wires. The discharging frame is a device for placing wires, which can be customized according to customer needs. Place your own wire rod in the discharging rack, find the wire head, send the wire head into the middle of the adjustment stringing wheel until it is sent into the wire feeding wheel, rotate the handle to feed the wire, compress the wire rod, tighten the wire pressing wheel of the straightening rack, and commission several times until the wire rod is straight.

4. Carefully open the operation manual or open the operation video to watch. If you don't understand, please contact our after-sales service hotline.

5. After learning how to operate, you can conduct simple sample debugging first. I wish you success!

2d wire bending machine (6)

The process shapes of steel wire bending machine

Our machine could process 500 kinds shapes

Main accessories of wire bending machine 

wire bending machine

wire bending machine

IMG_20190805_144359


 steel wire bending machine 

Packing :   standardn export seaworthy wooden case 

Shipment:  about 3-7 days after receipt of the deposit.

By sea to your nearest port;
By air to your nearest airport;
Ship to the warehouse in China according to the customers’ requirement

2d wire bending machine (1)

1.What if the machine can't be delivered on time after purchase?

We will compensate you according to the contract stipulation for the machines that are transacted according to the credit guarantee order.

2.What about quality problems after receiving the steel wire bending machine ?

If quality problems occur within one year, we will send engineers to your company to solve them free of charge.

3.What if you don't operate the machine after receiving it?

Detailed instructions will be provided. Within a year of receiving the machine, we have a free on-site after-sales service. We can also teach you how to use it remotely. However, we would like to welcome you to visit our factory and equipment before placing your order.

4.Machine parts are damaged. What should we do if they need to be replaced?

We have presented three sets of vulnerable parts for each machine (see list above) to ensure that they last longer. You can replace them by yourself, and we will teach you how to replace them.


杨静名片(1)



 


CONTACT US

Add : Block B, 1902, Tangning International Building Quannan Road , Qiaodong district ,xingtai City, Hebei province,China
Phone : 86-15830684624
E-mail: lucy@greatcitygroup.com
Skype : lucy921227
Address
Block B, 1902, Tangning International Building Qiaodong District, Xingtai City,Hebei Province.China
Call Us
+86-319-5206318
+86-15830684624
Send Message

CONTACT US

GREATCITY mechanical products, easy to operate, high efficiency, good service!

QUICK LINK

CATEGORY

CONTACT INFO

 Tel: +86-319-5206318
 E-mail: lucy@greatcitygroup.com
 Phone: 15830684624
 Add: Block B, 1902, Tangning International Building Qiaodong District,Xingtai City,Hebei Province.China

SUBSCRIBE

Be the first to know about our lastest products.
Copyright  2019  xingtai judu Technology Co., Ltd.