-
- +86-18832961559
- Skype:greatcity333
 |
| Quantity: | |
|---|---|
JD-PR-8S
Greatcity
8474802000
Our paint machine roller is operated by PLC and 7 Inch Touch screen. The rubber handle is tight and not loose. The fully automatic plastic handle device can be connected with the machine, fully automatic and can be used independently.
paint machine roller is to expertly produce kinds of paint roller handles fully automatically.
It is suitable for wire size from 4.0mm up to 8.0mm,frame bending, Ear stamping, head chamfering , knotching and plastic gripper dressing fully automatically.
Advantages & Feature of paint machine roller :
1. The error of full servo motor is smaller, the bending efficiency is higher, and the error is smaller than that of similar products of hydraulic press.
2. CNC operation is simpler and easier to learn than the same type of PLC products. Generally, the simple program can be edited by oneself within half an hour with elementary school education.
3. Because all the servo motors are used, there will be no hydraulic failure, the failure rate is lower, the scrubbing is more convenient, and the pollution caused by oil pollution will not occur.
Technical parameter:
Equipment comparison | ||
Contrast content | Traditional equipment | New equipment |
Capacity（24h） | 12000PCS | 43200PCS |
Cutter service life (cutting times of the same material)） | 100000PCS | 400000PCS |
Can handles be installed | NO | Yes (efficient synchronization) |
Production shape | one type | Can produce all models on the market |
Processing wire diameter type | One size of 5-8mm | 4，5，6,7，8mm all diameter |
Single set of equipment cost | 15000USD（One set make one shape） | 46900USD（Full set of functions） |
Fixed investment in 5-6 shapes | 70300-84400USD | 46900USD |
Roller brush size adjustment | fixed | Movable modular design, visual ruler adjustment |
Straightening machine | For traditional adjusting machine, it takes about 20-30 minutes to change the wire. | Adjusting machine with memory function, change the wire for 3 seconds to straighten |
paint machine roller video link
https://www.youtube.com/watch?v=MWdRMQjS1P0
Packaging : standard export seaworthy wooden case packing.for paint machine roller
Delivery time: 10--15 days after receiving the deposit .
you can choose shipment by sea or train.
We have our own farwarder. We can check the delivery information timely. You can also use forwarder by yours. We will contact with him ASAP.
FAQ
1 Q:Are you factory or trading company?
A:We are a trading and manufacturing factory.We have a factory in Hebei Province.
2 Q:How about the package of paint machine roller?
A:Generally we pack the goods by Wooden Case, also package that as your requirements.
4 Q:How do you ensure quality control?
A:We ensure the quality contorl by 2 steps:
1 after finish our workers will check the machine whole accessories one by one.
2 our package department will check before they pack.
5 Q:How about your delivery time?
A:25-40 days after received the deposit.
Our paint machine roller is operated by PLC and 7 Inch Touch screen. The rubber handle is tight and not loose. The fully automatic plastic handle device can be connected with the machine, fully automatic and can be used independently.
paint machine roller is to expertly produce kinds of paint roller handles fully automatically.
It is suitable for wire size from 4.0mm up to 8.0mm,frame bending, Ear stamping, head chamfering , knotching and plastic gripper dressing fully automatically.
Advantages & Feature of paint machine roller :
1. The error of full servo motor is smaller, the bending efficiency is higher, and the error is smaller than that of similar products of hydraulic press.
2. CNC operation is simpler and easier to learn than the same type of PLC products. Generally, the simple program can be edited by oneself within half an hour with elementary school education.
3. Because all the servo motors are used, there will be no hydraulic failure, the failure rate is lower, the scrubbing is more convenient, and the pollution caused by oil pollution will not occur.
Technical parameter:
Equipment comparison | ||
Contrast content | Traditional equipment | New equipment |
Capacity（24h） | 12000PCS | 43200PCS |
Cutter service life (cutting times of the same material)） | 100000PCS | 400000PCS |
Can handles be installed | NO | Yes (efficient synchronization) |
Production shape | one type | Can produce all models on the market |
Processing wire diameter type | One size of 5-8mm | 4，5，6,7，8mm all diameter |
Single set of equipment cost | 15000USD（One set make one shape） | 46900USD（Full set of functions） |
Fixed investment in 5-6 shapes | 70300-84400USD | 46900USD |
Roller brush size adjustment | fixed | Movable modular design, visual ruler adjustment |
Straightening machine | For traditional adjusting machine, it takes about 20-30 minutes to change the wire. | Adjusting machine with memory function, change the wire for 3 seconds to straighten |
paint machine roller video link
https://www.youtube.com/watch?v=MWdRMQjS1P0
Packaging : standard export seaworthy wooden case packing.for paint machine roller
Delivery time: 10--15 days after receiving the deposit .
you can choose shipment by sea or train.
We have our own farwarder. We can check the delivery information timely. You can also use forwarder by yours. We will contact with him ASAP.
FAQ
1 Q:Are you factory or trading company?
A:We are a trading and manufacturing factory.We have a factory in Hebei Province.
2 Q:How about the package of paint machine roller?
A:Generally we pack the goods by Wooden Case, also package that as your requirements.
4 Q:How do you ensure quality control?
A:We ensure the quality contorl by 2 steps:
1 after finish our workers will check the machine whole accessories one by one.
2 our package department will check before they pack.
5 Q:How about your delivery time?
A:25-40 days after received the deposit.
