- 0086-0319-5206318
- +86-15830684624
- Skype:lucy921227
 |
| Quantity: | |
|---|---|
product introduction:
automatic roller handle making machine is designed to expertly produce paint roller handles frame fully automatically.
It is suitable for wire size from 4.0mm up to 8.0mm. This can produce paint roller handle with edge threading andnotching fully automatically.
Features
1) Simple structure in linear type ,easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) High pressure double crank to control the die opening and closing.
4) Running in a high automatization and intellectualization,no pollution
5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine .
Technical parameter:
Equipment comparison | ||
Contrast content | Traditional equipment | New equipment |
Capacity（24h） | 12000PCS | 43200PCS |
Cutter service life (cutting times of the same material)） | 100000PCS | 400000PCS |
Can handles be installed | NO | Yes (efficient synchronization) |
Production shape | one type | Can produce all models on the market |
Processing wire diameter type | One size of 5-8mm | 4，5，6,7，8mm all diameter |
Single set of equipment cost | 15000USD（One set make one shape） | 46900USD（Full set of functions） |
Fixed investment in 5-6 shapes | 70300-84400USD | 46900USD |
Roller brush size adjustment | fixed | Movable modular design, visual ruler adjustment |
Straightening machine | For traditional adjusting machine, it takes about 20-30 minutes to change the wire. | Adjusting machine with memory function, change the wire for 3 seconds to straighten |
automatic roller handle making machine video link
automatic roller handle making machine
Advantages: 1. The new design adopts lever principle, which can save time and labor and reduce die loss. 2. The die is easier to disassemble. The traditional design of die replacement needs integral disassembly, but the new design of flattening die is easier to disassemble and replace, and the die can be replaced according to the wire diameter, which is not limited by the wire diameter (5-8mm).
Advantages: 2. The independent hydraulic cylinder replaces the four cylinder forming system, so the space is more compact. Due to the traditional design, each hydraulic cylinder needs action time. The traditional roller brush forming machine can form one cylinder in 6 seconds at the fastest, and the forming needs four hydraulic cylinders to complete all the actions. The new roller brush forming machine only uses one hydraulic cylinder to complete the forming task, The molding speed is increased to 2 seconds, and the speed is increased by 3 times. 2. Optical head molding can improve the efficiency by three times. In addition, it can automatically install the handle, which greatly improves the production efficiency. Compared with the traditional equipment host part, it improves the production efficiency by 4 times, and has the function of automatic installation handle.
Packaging : standard export seaworthy wooden case packing.for automatic roller handle making machine
Delivery time: 10--15 days after receiving the deposit .
you can choose shipment by sea or train.
We have our own farwarder. We can check the delivery information timely. You can also use forwarder by yours. We will contact with him ASAP.
FAQ
1.what is automatic roller handle making machine Packing?
Free fumigation safe Wood case package.
2.what is MOQ?
1set can be acceptable for trail order.
3.can we do OEM and ODM?
Can changing on design , color ,: acceptable(welcome)
develop on artwork and sketch : acceptable
4.what is your warranty?
Warranty 1 years
5.what time for delivery?
30-35 days for our own design.(motor:380v 50hz 3phases)
40-45 days for cusmoized model.
6.How do payment?
TT, 40-50% deposit ,balanced paid off before shippment.
product introduction:
automatic roller handle making machine is designed to expertly produce paint roller handles frame fully automatically.
It is suitable for wire size from 4.0mm up to 8.0mm. This can produce paint roller handle with edge threading andnotching fully automatically.
Features
1) Simple structure in linear type ,easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) High pressure double crank to control the die opening and closing.
4) Running in a high automatization and intellectualization,no pollution
5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine .
Technical parameter:
Equipment comparison | ||
Contrast content | Traditional equipment | New equipment |
Capacity（24h） | 12000PCS | 43200PCS |
Cutter service life (cutting times of the same material)） | 100000PCS | 400000PCS |
Can handles be installed | NO | Yes (efficient synchronization) |
Production shape | one type | Can produce all models on the market |
Processing wire diameter type | One size of 5-8mm | 4，5，6,7，8mm all diameter |
Single set of equipment cost | 15000USD（One set make one shape） | 46900USD（Full set of functions） |
Fixed investment in 5-6 shapes | 70300-84400USD | 46900USD |
Roller brush size adjustment | fixed | Movable modular design, visual ruler adjustment |
Straightening machine | For traditional adjusting machine, it takes about 20-30 minutes to change the wire. | Adjusting machine with memory function, change the wire for 3 seconds to straighten |
automatic roller handle making machine video link
automatic roller handle making machine
Advantages: 1. The new design adopts lever principle, which can save time and labor and reduce die loss. 2. The die is easier to disassemble. The traditional design of die replacement needs integral disassembly, but the new design of flattening die is easier to disassemble and replace, and the die can be replaced according to the wire diameter, which is not limited by the wire diameter (5-8mm).
Advantages: 2. The independent hydraulic cylinder replaces the four cylinder forming system, so the space is more compact. Due to the traditional design, each hydraulic cylinder needs action time. The traditional roller brush forming machine can form one cylinder in 6 seconds at the fastest, and the forming needs four hydraulic cylinders to complete all the actions. The new roller brush forming machine only uses one hydraulic cylinder to complete the forming task, The molding speed is increased to 2 seconds, and the speed is increased by 3 times. 2. Optical head molding can improve the efficiency by three times. In addition, it can automatically install the handle, which greatly improves the production efficiency. Compared with the traditional equipment host part, it improves the production efficiency by 4 times, and has the function of automatic installation handle.
Packaging : standard export seaworthy wooden case packing.for automatic roller handle making machine
Delivery time: 10--15 days after receiving the deposit .
you can choose shipment by sea or train.
We have our own farwarder. We can check the delivery information timely. You can also use forwarder by yours. We will contact with him ASAP.
FAQ
1.what is automatic roller handle making machine Packing?
Free fumigation safe Wood case package.
2.what is MOQ?
1set can be acceptable for trail order.
3.can we do OEM and ODM?
Can changing on design , color ,: acceptable(welcome)
develop on artwork and sketch : acceptable
4.what is your warranty?
Warranty 1 years
5.what time for delivery?
30-35 days for our own design.(motor:380v 50hz 3phases)
40-45 days for cusmoized model.
6.How do payment?
TT, 40-50% deposit ,balanced paid off before shippment.
